Re: Xiaomi smart home kit
Elküldve: 2017.07.20. 19:38
LOL 
De azert megnyugtato, hogy Kinaban hasznalhatod 
De azert megnyugtato, hogy Kinaban hasznalhatod 
Viszont, találtam egy megoldást dzsátubin, ezt ki is próbáltam és úgy néz ki működik a dolog... teljes értékű így a kamera.
I had the same problem before. I have a camera with Mac-adress starring with 34 (the one with the plastic reset button). I got it to work using the Mi Home app version 4.0.8 (you can download it on Google if you search for Mi Home 4.0.8 apk). Install the app and then unselect "update plug-ins", set region to "Mainland China" and change language to English. DO NOT UPDATE CAMERA OR APP.
When this is done you have to reset the camera to the firmware version 3.0.3.56. You can do this by holding in the plastic setup button for 12-15 seconds. The status-led will tur off or solid orange. Wait until the led starts flashing orange. Now the camera is reset to the firmware it came with.
Do the setup as usual and make all the steps on the screen.
When you are done, after a while, the camera status-led will start blinking blue. Now the camera will work on WiFi LAN only. Unplug the camera and leave it unplugged over night. plug the camera back in and wait for a couple of minutes and the status-led will turn solid blue. This means that the camera is connectet to the cloud server and now can be accessed via your phones 4g/3g or on a different WiFi than the cameras.
I don't know why you will have to wait over night for the camera to start working via cloud (4g/3g). But that's how it is.. I have tried this with 3 cameras and it works on all of them.
